Measure.Length.Form.Roundness

Roundness is the feature described as deviation (radial error) from true roundness (mathematically, a circle).

Result

Name	Quantity	m-layer aspect
Roundness	length	length (AS3)

Parameters

Parameter	Required	Quantity	m-layer aspect	Definition or allowed values
Diameter	Required	length	length (AS3)	Diameter measured
Height	Optional	length	length (AS3)	Above turnable
NumberOfPoints	Optional	—	—	Measurement Points
StartAngle	Optional	plane-angle	plane-angle (AS10)	Rotational Angle from reference
StopAngle	Optional	plane-angle	plane-angle (AS10)	Rotational Angle from reference
Reference	Optional	—	—	DIN, ISO, ASTM, ASME, or Federal G-Series Measurement Specifications [plain text]

Taxa from the NCSLI MII Measurand Taxonomy Catalog, published by NCSL International, Measurement Information Infrastructure (MII) & Automation Committee, used under CC BY-SA 4.0. Converted from XML to JSON and reformatted for display. Taxon content is unchanged. This section’s taxonomy content stays under CC BY-SA 4.0; the rest of the site is CC BY 4.0.

The materials and information contained herein are provided and promulgated as an industry aid and guide, and are based on standards, formulae, and techniques recognized by NCSL International. The materials are prepared without reference to any specific federal, state, or local laws or regulations, and NCSL International does not warrant or guarantee any specific result when relied upon. The materials provide a guide or recommended practices and are not all-inclusive. From time-to-time commercial equipment, instruments, or materials are identified in technical publications to foster understanding. Such identification does not imply recommendation or endorsement by the NCSL International, nor does it imply that the materials or equipment identified are necessarily the best available for the purpose.