Measure.Length.Form.Straightness.Surface

MeasureDimensional

The minimum normal (perpendicular) distance between two parallel planes that fully contain a surface along a specified line.

Result

Name	Quantity	m-layer aspect
Straightness	length	length (AS3)

Parameters

Parameter	Required	Quantity	m-layer aspect	Definition or allowed values
LineLength	Required	length	length (AS3)	—
StartPointX	Optional	length	length (AS3)	Start Point on the X-Axis distance from the reference
StartPointY	Optional	length	length (AS3)	Start Point on the Y-Axis distance from the reference
EndPointX	Optional	length	length (AS3)	End Point on the X-Axis distance from the reference
EndPointY	Optional	length	length (AS3)	End Point on the Y-Axis distance from the reference
NumberOfPoints	Optional	—	—	Number of Points measured
Reference	Optional	—	—	DIN, ISO, ASTM, ASME, or Federal G-Series Measurement Specifications [plain text]

Taxa from the NCSLI MII Measurand Taxonomy Catalog, published by NCSL International, Measurement Information Infrastructure (MII) & Automation Committee, used under CC BY-SA 4.0. Converted from XML to JSON and reformatted for display. Taxon content is unchanged. This section’s taxonomy content stays under CC BY-SA 4.0; the rest of the site is CC BY 4.0.

The materials and information contained herein are provided and promulgated as an industry aid and guide, and are based on standards, formulae, and techniques recognized by NCSL International. The materials are prepared without reference to any specific federal, state, or local laws or regulations, and NCSL International does not warrant or guarantee any specific result when relied upon. The materials provide a guide or recommended practices and are not all-inclusive. From time-to-time commercial equipment, instruments, or materials are identified in technical publications to foster understanding. Such identification does not imply recommendation or endorsement by the NCSL International, nor does it imply that the materials or equipment identified are necessarily the best available for the purpose.