Measure.Torque.HydraulicPressure

MeasureTorque

A test process that measures the accuracy of hydraulic torque wrenches where hydraulic pressure is applied to the torque wrench and it applies a known torque to the nut or bolt being tightened. This process usually is used to calibrate hydraulic torque wrenches producing a lookup sheet the operator can use to quickly look up the pressure required to correctly torque the bolt or nut.

Result

Name	Quantity	m-layer aspect
Torque	torque	—

Parameters

Parameter	Required	Quantity	m-layer aspect	Definition or allowed values
Torque	Required	torque	—	The expected torque output
Pressure	Required	pressure	pressure (AS14)	The applied hydraulic pressure
Direction	Optional	—	—	{CW, CCW}
Connector	Optional	—	—	Connector Name [Text]

Taxa from the NCSLI MII Measurand Taxonomy Catalog, published by NCSL International, Measurement Information Infrastructure (MII) & Automation Committee, used under CC BY-SA 4.0. Converted from XML to JSON and reformatted for display. Taxon content is unchanged. This section’s taxonomy content stays under CC BY-SA 4.0; the rest of the site is CC BY 4.0.

The materials and information contained herein are provided and promulgated as an industry aid and guide, and are based on standards, formulae, and techniques recognized by NCSL International. The materials are prepared without reference to any specific federal, state, or local laws or regulations, and NCSL International does not warrant or guarantee any specific result when relied upon. The materials provide a guide or recommended practices and are not all-inclusive. From time-to-time commercial equipment, instruments, or materials are identified in technical publications to foster understanding. Such identification does not imply recommendation or endorsement by the NCSL International, nor does it imply that the materials or equipment identified are necessarily the best available for the purpose.