Source.Ratio.Acceleration.Delta.Frequency

SourceVibration

UUT is placed in a device, normally a shaker, which then moves in a single axis direction at a known acceleration at the reference frequency. Then the frequency is changed to the Test Frequency and difference in sensitivity is expressed as a ratio (Test Frequency / Ref Frequency).

Result

Name	Quantity	m-layer aspect
Ratio	ratio	—

Parameters

Parameter	Required	Quantity	m-layer aspect	Definition or allowed values
OutputQuantity	Required	—	—	{charge, resistance, capacitance, voltage}
Sensitivity	Required	—	—	Output quantity divided by the input acceleration
FrequencyRef	Required	frequency	frequency (AS12)	Reference Frequency
Frequency	Required	frequency	frequency (AS12)	Test Frequency
Axis	Optional	—	—	{X,Y, Z}
Acceleration	Optional	acceleration	acceleration (AS39)	Acceleration (m/s²)
ExcitationVoltage	Optional	voltage	electric-potential (AS22)	Excitation Voltage

Taxa from the NCSLI MII Measurand Taxonomy Catalog, published by NCSL International, Measurement Information Infrastructure (MII) & Automation Committee, used under CC BY-SA 4.0. Converted from XML to JSON and reformatted for display. Taxon content is unchanged. This section’s taxonomy content stays under CC BY-SA 4.0; the rest of the site is CC BY 4.0.

The materials and information contained herein are provided and promulgated as an industry aid and guide, and are based on standards, formulae, and techniques recognized by NCSL International. The materials are prepared without reference to any specific federal, state, or local laws or regulations, and NCSL International does not warrant or guarantee any specific result when relied upon. The materials provide a guide or recommended practices and are not all-inclusive. From time-to-time commercial equipment, instruments, or materials are identified in technical publications to foster understanding. Such identification does not imply recommendation or endorsement by the NCSL International, nor does it imply that the materials or equipment identified are necessarily the best available for the purpose.